Reasons Your Hot Water Heater Isn't Working
Reasons Your Hot Water Heater Isn't Working
Blog Article
Just how do you feel when it comes to How to Troubleshoot and Repair an Electric Water Heater?
Several modern residences make use of an electric hot water heater for their heating unit, as a result of its convenience as well as convenience of use. However, similar to any other electrical home appliances, troubles may occur with its use, unexpectedly. It can be truly irritating to wake up to a chilly shower as opposed to a hot one or having your bathroom with water that isn't warm enough and even also hot. Whatever the situation might be, hot water heater problems can be rather aggravating. Fortunately, we've made a listing of feasible solutions to your water heater problems. There are a variety of factors that could trigger most of these problems, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the primary power supply for safety and security. Whatever the problem is, getting it fixed ought to not present way too much of a concern if you follow these steps:
Call An Expert:
If after replacing all malfunctioning components and also resetting your temperature level, the water heater still isn't working, you may need to get in touch with a professional plumber for a specialist point of view. The trouble with your heating system could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the situation may be, an expert plumber would assist resolve the issue.
Inspect Your Power Supply:
As fundamental as this might appear, it is extremely needed. Without appropriate power, your hot water heater will not work. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the concern, merely transform it on and off once more. Change any type of damaged or worn-out fuse. Evaluate the appliance with power after these changes to see if it's currently functioning.
Examine Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't hot enough, you might require to inspect the temperature settings on your upper thermostat. Make certain the breaker is turned off before doing anything. Open the access panel and also press the red switch for temperature level reset above the thermostat. This should help warm the water. Transform the circuit breaker back on and check if the trouble has actually been fixed.
Check the Heating Element in the Hot Water Heater:
If it's not a power issue, then try looking into your heating element if it is still functioning. Check each of your heating elements to ensure the trouble isn't with any of them. If any of them is damaged, change that part and afterwards inspect whether the hot water is back on.
Verdict
Hot water heater problems are not constantly significant. A lot of them result from small issues like a blown fuse or damaged heating element. Replacing the damaged parts should suffice. However, if you are still incapable to fix the trouble, give a call to your nearby plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I was guided to that report about No Hot Water — Water Heater Repair through an acquaintance on a different website. Sharing is caring. Helping others is fun. I praise you for your time. Come back soon.
Explore
Report this page